Posted by VC Tech Support (12.245.132.212) on December 29, 2001 at 21:31:25:
In Reply to: M590 USB J3 pin out posted by Bruno on December 28, 2001 at 05:23:11:
This was posted once here already. Check back to the previous posts OR, since it is the holidays right now, I'll just give you the link here...
http://www.stud.fernuni-hagen.de/q3998142/pcchips/pinout.html
---------------------------------------------
: in the M590 manual, there is no way to know for J3
: which pins are for the USB ports, which pins are for the infrared connectors.
: I found the ground pin and the + VCC pins with one voltmeter.
: I then connected an double USB cable adaptor guessing where could be the USB pins.
: the light on the USB joystick flashes during the PC
: boot up but I cannot calibrate the joystick as it is
: not recognized or seen by the M590
: thanks